How to Set Up Orbi 770 RBE773 Tri Band Wi-Fi 7 Mesh Router?

When it comes to networking, there’s new technology released every day. Around 2021, we witnessed WiFi 6 devices, which have now evolved to WiFi 7. Also known as IEEE 802.11be EHT(Extremely High Throughput), WiFi 7 is the modern generation WiFi standard, prevalent among devices like the Orbi 770 Series WiFi 7 Mesh System. If you have recently upgraded to this router, learning about how to set up Orbi router RBE773 becomes important. This blog will details all the information on the Orbi 770 RBE773 setup process and how you can get started with using steadfast internet on your devices in no time.

Orbi 770 Series WiFi 7 Mesh System Setup Process

If you have recently purchased a new orbi 770 series wifi 7 mesh system for your home/office, you know what the next step should be. Now, setting up your devices so you have complete control on the network and more is important. This blog will walk you through the steps to access the orbi setup page using the orbilogin.net or orbilogin.com web address and begin setting up your network easily.

How to login Orbi RBE773 router?

The orbi 770 series wifi 7 mesh system login page can be accessed as long as you have the correct username and password details along with the correct web/IP address details. Additionally, you’ll also need the default login credentials like the username and the password.

Finally, make sure you have some equipment like Ethernet cable(s), DSL MODEM, a Computer/Smartphone, etc.

Beginning with the setup process

Once you collected these things, here are some steps you can follow:

Connect the modem to the router using an ethernet cable. Also, connect your computer to the main Orbi router using an ethernet cable. Make a connection between the LAN ports of both the devices.
Power on the devices by connecting the power adapter to the power outlet. Allow the power LED to become stable.
Connect your smartphone/computer to the Orbi 770 series wifi 7 mesh system using a wired or a wireless connection. If you prefer a wired connection, connect the LAN ports of the computer and the router using an ethernet cable. If you are connecting using wireless connection, look for the network name of your router in the “Networks and Sharing Center.”

Orbi RBE773 Router Setup Process

Once your computer is connected to the network, the next step would entail configuring the settings. If your computer is set up to work with a static IP address, change the same so it uses the DHCP protocols(Dynamic Host Configuration Protocol) from now on. This way, the router can obtain the IP address dynamically. Now, when you are ready, you can begin with the login and network setup by following the steps as mentioned:

Launch a web browser and in the address bar, type https://www.orbilogin.com and press Enter. You can also use the orbilogin.net web address or the IP address 192.168.1.1. You will be redirected to the orbi 770 series wifi 7 mesh system login page now.
On the login page, type in the username and password details in their respective fields and click on the “Login” button.
On the main orbi 770 series wifi 7 mesh system setup page, select the Advanced tab and then click on the Setup button. Thereafter, click on the Internet option.
When the “Internet” page appears, select Internet Setup from the menu and check the radio button next to the No option.
Select the internet IP address function from the two options visible on-screen. You can either select Obtain IP address dynamically or Use static IP address from the two.
Select the final DNS options from the two buttons- Obtain automatically from ISP or Use these DNS Servers.

Customizing the Orbi router Network

In the next window, you can customize the name of the Orbi router network and assign a network password as well. If you are using a dual-band router, you can configure the second network band as well. Once done, click on the Save button.
The final step of the orbi 770 rbe773 setup process would be assigning an admin username and password. Once done, click on the Done button.
The final network setup screen will show you the summary of the network settings you have configured. Review the same and then click on the Finish Setup button. The router may now reboot and once it is back up and running, you can proceed with connecting your devices to the new router network.

Once you have connected the main router and set things up, you can connect the satellites to the main router using the WPS method.

How to set up orbi router rbe773 using WPS?

You can use the WPS connection method to sync your satellites to the main router. To do so, first plug in your satellites in the room you want to access the internet at. Once there, allow the satellite to boot up. Now, you’ll find a WPS button on the side of the satellite. Press the WPS button and you will see the LED on the device start to blink.

Now, within a duration of 120 seconds, go to the primary Orbi router and press the WPS button on the same. This will connect your devices to each other and ensure that the satellite can broadcast the network signals from the main orbi 770 series wifi 7 mesh system further to your location. If you have a dual-band router, ensure that you complete the setup process for the 5GHz network band as well. Once connected, you can proceed with connecting to its network using your devices and accessing the internet.

FAQs

What are some orbi rbe773 firmware update instructions I can follow?

The firmware on your orbi 770 series wifi 7 mesh system usually gets updated on its own at regular intervals. However, you can always update it manually using the setup wizard. You can login to the Orbi 770 Series WiFi 7 Mesh System Setup wizard using the orbilogin.com web address and head to the device admin settings. Within the Firmware options, click on Check for Updates. The device will now check for the updates and if available, show you the file. If there’s an update available, click on the Install Updates Now button and the firmware update process will be initiated. The system may take some time to complete the update process. Wait till the process gets completed.

What to do if orbi 770 series wifi 7 mesh system setup login page not working?

If the login page does not work, ensure that the router is connected to the computer either using a LAN cable or through the WiFi network. Once you connect the devices, only then can you actually access the local web address based setup wizard. If you are unable to use the web setup wizard, check if the connections between the devices are securely done. Reconnect the cable wires and try accessing the orbi 770 series wifi 7 mesh system login page again.

Secondly, check if you have used the correct login address. The correct web address to access the login page is orbilogin.com or orbilogin.net. Also, ensure that you are typing this URL in the web address bar and not in the search bar.

The Final Word

The orbi 770 series wifi 7 mesh system is a revolutionary device meant to change the way you access the internet. With fast internet speeds and steadfast connectivity it facilitates, you stay connected to the web at all times without any interruption or lags. If you are wondering how to set up orbi router rbe773, the information we shared in this blog will come in handy. In the worst case scenario, if you face issues with the setup or are unable to access the setup wizard, you can always reach out to the experts at our end for help.