Netgear Orbi RBK663 Setup | Orbi RBK663 Firmware Update

Netgear Orbi Whole Home Tri-Band WiFi 6 Mesh Network System RBK663 Setup

Netgear Orbi RBK663 Setup process can easily be completed using the orbilogin.net web address. You can change the network settings, configure parental controls, and make the latest orbi rbk663 firmware update effectively. However, proceeding with the netgear orbi rbk663 login and setup isn’t always seamless. You might face issues with accessing the orbilogin.com web address or navigating through the netgear orbi rbk663 installation wizard. Whatever be the issue you are facing, learning the right steps to accessing the orbi RBK663 setup wizard always helps.

This website will help you get done with not just the netgear orbi rbk663 login process but Orbi RBK663 Setup as well. You’ll learn ways you can resolve issues with the same and get your internet connection up and running in under no time.

How to install netgear orbi rbk663?

The orbilogin.net setup wizard is only accessible as long as you have the correct details. These may include the default login credentials like the username and the password. You’ll also need access to some additional equipment like Ethernet cable(s), DSL MODEM, and a Computer/Smartphone. Once you have these, you may proceed with the steps as mentioned:

How to login netgear orbi rbk663?

Now, once you are connected to the Netgear Orbi router network, open a compatible web browser on your computer and in the address bar type https://www.orbilogin.com and press enter. You can also use the web address https://www.orbilogin.net instead. This will redirect you to the orbilogin.com login page online.
Once you are on the Orbi setup wizard page, you can proceed with the on-screen instructions to complete the setup. You’ll be required to modify the SSID and netgear orbi rbk663 login password details. Make sure you add at least one satellite before you save the settings.
Select the “Advanced” Tab and then click on the Setup tab. Here, choose the Internet option.
From the Internet page, select Internet Setup and check the radio button next to the “No” option.
If you are using a DSL connection, you must enter the PPPoE username and password to continue with the setup. In case, your internet connection would require a domain name, you can type in the same in the Domain Name field.
Select an Internet IP address from among the two options viz “Obtain IP address dynamically” and “Use static IP address”.
Next, select a domain name server address option from the two radio buttons viz “get automatically from ISP” and “Use these DNS servers”.
From the final Orbi RBK663 Setup Wizard screen, review the configuration you have just modified before you apply the changes.

These steps conclude the Netgear orbi router login process.

Fixing issues with the Netgear Orbi setup

There can be a host of issues that you might face while you are trying to access the Netgear Orbi setup page or the orbilogin.com web page. These can be:

Netgear orbi rbk663 login Not Working

Issues with the Orbi router firmware update

Forgotten orbi router login password

And more..

Netgear orbi rbk663 login Not Working

If you are not able to access the orbilogin.com login page, you can check for the ethernet cable connections(in case of a wired connection) with the computer system. If you are connected wirelessly, check if you are connected to the correct wireless network in the first place.

While you are trying to access the orbi router login page, also make sure you are not using an incorrect web address. The correct web address is https://www.orbilogin.net or simply www.orbilogin.com. Alternatively, you can also use the IP address 192.168.1.1 to access the orbi login page. If you are not sure about the IP address, you can determine the same using the “ipconfig” command from the Command Prompt window. Once you have obtained them, you can use the details to get access to the orbi satellite setup wizard.

How to update netgear orbi rbk663 firmware?

setup wizard and getting past the usual functioning of your Netgear Orbi router, it is important that you learn how to update the outdated firmware of your Netgear Orbi router. While you can turn on the auto-firmware updates feature during the time when you first set up your Orbi router, you can also enable the updates afterwards.

In order to update the firmware version of your Netgear orbi RBK663 setup, here are some steps you can follow:

Go to the official support page of Netgear. You can access it using the netgear.com/support URL. When you reach the support page, click on the Support option at the top right of the menu bar.
The Support Page will appear and you’ll see a list of device models. Select the orbi router series and then select the specific router model you own.
Click on the name of the router model and then from the menu bar on the left hand side, select Firmware and Software Downloads. You can find this bar under the Pick a Topic section.
You’ll now see the options to download a firmware for the satellite and the main router. Download the one that you require. A compressed file will be downloaded onto our system drive.
Now, go to the Downloads section on your computer and extract the firmware update file from the compressed firmware update file.

Netgear orbi rbk663 login Not Working

Now, open the web browser and access the online Netgear Orbi setup wizard. When you reach the home page, click on the Device Administration section.
Here, click on the Firmware Update button and upload the downloaded extracted file. The status of the upload will be shown on the screen and you can then click on the Update button once it is complete.
The router may restart several times during the update process. Remember not to turn it off or it may damage the hardware components.
Once your router is updated you can proceed with the Orbi login process.

Netgear orbi rbk663 not connecting to internet

Since troubleshooting issues with the Netgear orbi RBK663 setup, and orbi login is a lengthy process, there are some standard troubleshooting steps you can follow to troubleshoot netgear orbi rbk663 not connecting to wifi like issues in under no time. Here are some steps you can follow:

If you encounter issues while accessing the NETGEAR Orbi setup page, restart your modem first and try connecting to the page again. If you already have connected your Orbi router to your modem, disconnect the devices.
Restart the Modem before you connect your router.
Once the Modem restarts, connect it to the Internet port of your router with an Ethernet cable.
Try reinstalling your NETGEAR router.
If you are unable to install your Netgear router with install netgear orbi app, you can configure it manually using the router’s web interface.
Connect your computer to the router’s wifi network using the SSID and the network key credentials to Login orbi satellite.
You can locate the orbilogin net credentials on the sticker on the back of the box that came with the router.
Launch the web browser on your device to access orbilogin net and access the Netgear orbi wifi setup wizard.
Once you are done logging in, the orbi wifi login wizard will appear and then go on to follow the instructions on the screen to complete the manual installation process.

How to Reset Netgear Orbi RBK663 Password and Fix Reset Issues

If you forgot your router login or are having trouble after resetting your device, follow these steps to reset your Netgear Orbi RBK663 and get it working again:

If you can’t log in to your Orbi router, you need to do a factory reset.
Power on the Orbi router.
Press and hold the Reset button for 10 to 15 seconds with a paperclip.
Release the button when the LED blinks.
The router will reboot with the default settings.
Default login details:
Username: admin
Password: password
Log in at orbilogin.com or 192.168.1.1 and set a new admin and Wi-Fi password.

If you think orbi factory reset not working, you can simply try to restart your devices and try the process again.

FAQs

How to Set Up Orbi After Factory Reset?

After the reset, you must reconfigure the router. Here are some steps you can follow:

Connect your phone or computer to the default Wi-Fi network.
Open orbilogin.com or use the Orbi App.
Log in with the default credentials.
Follow the setup wizard to create a new Wi-Fi name and password.
Sync Orbi satellites if applicable.

What to do if Orbi Not Found After Factory Reset?

If your Orbi is not found after the factory reset, you can follow these steps:

Make sure the router is powered on and the LEDs are active.
Look for the default Wi-Fi network (Orbi-XXXX).
Restart your device and rescan for networks.
Try connecting via Ethernet and access orbilogin.com.
Do the factory reset again if necessary.

What to do if Netgear Orbi RBK663 Not Working After Reset?

If the Netgear Orbi RBK663 is not working after the reset, follow the steps:

Check that the modem is connected to the Orbi WAN port.
Check the LED status; amber or white means there are setup or connection issues.
Run the setup process again.
Update the firmware once you have internet access.
Reset and re-sync satellites if they do not connect.